Back to Index

Update: 2024-09-28

Table of Contents

CombDistortion is a distortion using self-modulating comb filter. Raw output sounds harsh, and it is better to use with external cabinet impulse response. Note event can be used to control delay time of comb filter.

full package contains following builds.

Linux build is built on Ubuntu 24.04. If you are using distribution other than Ubuntu 24.04, plugin will not likely to run. In this case, please take a look at build instruction.

macOS package is recommended for macOS user. I can’t purchase Apple Developer Program, therefore installation requires a workaround to bypass Gatekeeper. Details of workaround are written in Installation -> macOS Specific section.

Feel free to contact me on GitHub repository or ryukau@gmail.com.

You can fund the development through paypal.me/ryukau.

Move *.vst3 directory to:

DAW may provides additional VST3 directory. For more information, please refer to the manual of the DAW.

Notice: Some plugins don’t have presets provided by Uhhyou Plugins.

Presets are included in the plugin package linked at the top of this page. To install presets, follow the steps below.

  1. Download plugin from a link at the top of this page.
  2. Extract downloaded zip file.
  3. Open presets directory placed in extracted package.
  4. Move Uhhyou directory into an OS specific preset directory (see below).

Below is a list of preset directories for each OS.

Preset directory name must be the same as the plugin. If preset directory does not exist, create it.

If DAW doesn’t recognize the plugin, try installing C++ redistributable (vc_redist.x64.exe). Installer can be found in the link below.

On Ubuntu 24.04, those packages are required.

sudo apt install libxcb-cursor0  libxkbcommon-x11-0

If DAW doesn’t recognize the plugin, take a look at Package Requirements section of the link below and make sure all the VST3 related package is installed.

REAPER on Linux may not recognize the plugin. A workaround is to delete a file ~/.config/REAPER/reaper-vstplugins64.ini and restart REAPER.

Important: full package is not confirmed working. When using full, try removing following files.

macOS package doesn’t contain above files. Also, all packages are in “ad-hoc signing” state set by codesign command.

When trying to run plugin first time, following message may appear on macOS.

<PluginName>.vst3 is damaged and can't be opened. You should move it to the Trash.

In this case, open terminal and try running one or both of following command to unzipped .vst3 directory. Replace /path/to/PluginName.vst3 according to your install location.

xattr -rd com.apple.quarantine /path/to/PluginName.vst3
xattr -rc /path/to/PluginName.vst3

Plugin may be considered as unsigned/un-notarized application. In this case, open System Preferences, go to Security & Privacy → General, then click the Open Anyway button. The offcial Apple help page linked below has screenshots for the procedure. See “If you want to open an app that hasn’t been notarized or is from an unidentified developer” section.

If the plugin is still not working, try changing install location to /Library/Audio/Plug-ins/VST3/ or /Users/$USERNAME/Library/Audio/Plug-ins/VST3/ whichever still haven’t tried.

If all the above methods do not work, try following the steps below.

  1. Open terminal and run sudo spctl --master-disable.
  2. Go to System Preferences → Security and Privacy → General → Allow apps downloaded from, then select “Anywhere”.

Beware that steps above degrades security of your system. To revert the settings, follow the steps below.

  1. Go to System Preferences → Security and Privacy → General → Allow apps downloaded from, then select option to “App Store and identified developers”.
  2. Open terminal and run sudo spctl --master-enable.

Note This section may not relevant to macOS packages. However it’s not verified. (GitHub issue)

To use full package, following command might be used.

sudo codesign --force --deep -s - /path/to/PluginName.vst3

codesign might not be available without installing Xcode.

At first time, create color config file to:

style.json will be loaded for each time a plugin window opens.

Several color themes are available on the link below. To use, copy the text to style.json.

Below is an example of style.json.

{
  "fontFamily"        : "Tinos"    ,
  "fontBold"          : true       ,
  "fontItalic"        : true       ,
  "foreground"        : "#000000"  ,
  "foregroundButtonOn": "#000000"  ,
  "foregroundInactive": "#8a8a8a"  ,
  "background"        : "#ffffff"  ,
  "boxBackground"     : "#ffffff"  ,
  "border"            : "#000000"  ,
  "borderCheckbox"    : "#000000"  ,
  "borderLabel"       : "#000000"  ,
  "unfocused"         : "#dddddd"  ,
  "highlightMain"     : "#0ba4f1"  ,
  "highlightAccent"   : "#13c136"  ,
  "highlightButton"   : "#fcc04f"  ,
  "highlightWarning"  : "#fc8080"  ,
  "overlay"           : "#00000088",
  "overlayHighlight"  : "#00ff0033"
}

Following is a list of font options.

System font can be used as fontFamily. To use different fonts for different plugins, place *.ttf file into custom font path: *.vst3/Contents/Resources/Fonts.

Notice: If the combination of fontFamily, fontBold, fontItalic does not exist in custom font path, default font of VSTGUI is used.

If fontFamily is set to empty string "", then "Tinos" is used as fallback. If the length is greater than 1 and the font family name doesn’t exist, default font of VSTGUI is used.

Styles other than bold, italic or bold-italic are not supported by VSTGUI. For example, “Thin”, “Light”, “Medium”, and “Black” weights cannot be used.

Hex color codes are used.

First letter # is conventional. Plugins ignore the first letter of color code, thus ?102938, \n11335577 are valid.

Do not use characters outside of 0-9a-f for color value.

Following is a list of color options. If an option is missing, default color will be used.

Right Click on the controls pops up a context menu provided by DAW.

Knob and slider provides following controls:

If the image is small, use Ctrl + Mouse Wheel or “View Image” on right click menu to scale.

Diagram only shows overview. It’s not exact implementation.

CombDistortion can receive note events to control the delay time of feedback. This is an convenience feature to match the texture of distortion to the input signal, by supplying the same note events used to generate input signal.

Characters inside of square brackets [] represents unit. Following is a list of units used in CombDistortion.

Output

Output gain.

Mix

Mixing ratio of input signal and distorted signal.

When set to leftmost, input signal will be bypassed. When the value approaches to rightmost, feedback becomes stronger.

Feedback

Feedback gain.

Beware that Feedback doesn’t change output when Mix is set to leftmost.

Delay

Delay time of comb filter.

AM Mix, AM Gain, AM Invert

The amount of amplitude modulation applied to feedback signal.

To avoid blow up, tanh is used to limit the amplitude of modulation signal. This means that the character of sound may differ depending on the amplitude of input signal. However, when AM Gain is high, the difference may be negligible.

FM Mix, FM Amount, FM Clip

The amount of delay time modulation applied to feedback signal.

To avoid setting negative delay time, abs is applied to modulation signal.

Highpass [Hz], Lowpass [Hz]

Cutoff frequency of highpass or lowpass filter on feedback path.

Origin [st.]

Origin of MIDI note number.

Note event with this note number doesn’t change the sound.

Scaling

Scaling of note event modulation to delay time.

When set to 1.0, the modulation amount follows the pitch of the note. When set to -1.0 pitch will be inverted.

Release [s]

Release time to resume to the original Delay time after note-off. The value is rough indication and not exact.

Smoothing [s]

Paramter smoothing time in seconds.

For example, if the value of Smoothing is set to 0.01 or something short, the change of parameter almost immediately applies. So it sounds more snappy, but may introduce audible pop noise. On the other hand, if the value of Smoothing is set to 1.0 for example, the change of parameter is only slowly followed.

Oversampling

Oversampling options.

CombDistortion is licensed under GPLv3. Complete licenses are linked below.

If the link above doesn’t work, please send email to ryukau@gmail.com.

VST is a trademark of Steinberg Media Technologies GmbH, registered in Europe and other countries.